(678) 861-7446 Start a project
Mobile Laundry Unit box truck wrap with bubble graphics and foundation seal for Community Incident Response Foundation

Branding BlogsFleet Branding & Vehicle Graphics

Box Truck and Trailer Wraps: Designing Graphics That Read at Highway Speed

By , Owner4 min read

A box truck or trailer wrap works when someone in the next lane can read who you are and what you do in a few seconds. That means big, simple panels: the name sized for distance, what you do in a few words, and a phone number or web address large enough to read twice, with small copy kept off rivets, ribs and door seams.

How big should the letters be on a box truck?

Research from the United States Sign Council and the Pennsylvania Transportation Institute gives a useful starting point: about 4-inch letters can be read at 100 feet, 10-inch letters at 250 feet and 16-inch letters at roughly a city block. A box truck side is large enough to put the company name well past that range, which is exactly why it should not be crowded with small text.

Minimum letter height for a given viewing distanceBar chart from the United States Sign Council and Pennsylvania Transportation Institute letter visibility chart: 4 inch letters for 100 feet, 10 inches for 250 feet, 16 inches for 360 feet or about a city block, and 22 inches for 500 feet. Below, three layout rules for box trucks and trailers.BOX TRUCK AND TRAILER WRAPSHOW BIG THE LETTERSNEED TO BEVIEWING DISTANCEMINIMUM LETTER HEIGHT100 FT4"250 FT10"360 FTabout a city block16"500 FT22"WHAT WE DO WITH IT1Name and logo sized for the far lane,not the parking space2What you do in a few words, phoneor web big enough to read twice3Small copy kept off rivets, ribsand roll-up door seamsSource: United States Sign Council / PennsylvaniaTransportation Institute letter visibility chart.
Minimum letter height for a given viewing distance, and how we apply it on truck and trailer sides.

What goes on each panel of a box truck?

  • Sides: the company name and logo, sized for the far lane, plus what you do in a few words.
  • Rear: the phone number or web address, because the rear is what traffic stares at when stopped.
  • Cab doors: logo, and any required USDOT number at the size regulations call for.
  • Roll-up door: artwork that tolerates the panel joints, with no small copy crossing a seam.

How do you wrap rivets, ribs and roll-up doors?

Box bodies and trailers are not smooth. Rivet lines, corrugation and roll-up door joints are where cheap wraps fail first. Cast wrap film is made to conform to those surfaces, and installers work it into each rivet and relieve it at seams so it does not tent or lift. Designers help by keeping faces, phone numbers and fine print off those lines.

Trailer wraps: concession, enclosed and equipment trailers

Trailers spend a lot of time parked where people walk by, at events, job sites and storefronts, so they reward a bolder design than a truck that is mostly seen at speed. A concession trailer’s serving window and menu area need planning so the design survives the window being open.

Enclosed trailer graphics for NPSG Development by High Stakes Creative
NPSG Development: enclosed trailer graphics that read at a glance.

How long does a box truck wrap take?

Most vehicles install in one to three days. Box trucks with roll-up doors and large trailers can take longer because of the surface area and the detail work at rivets and seams. We confirm the schedule after the vehicle check.

Questions buyers ask

Can you wrap a box truck with rivets?

Yes. Cast wrap film is designed to conform around rivets and corrugation, and our installers work it into each one. Designs keep small text off rivet lines.

Can you wrap a roll-up door?

Yes. The graphic is applied across the slats and cut at each joint so the door still rolls. We avoid putting phone numbers or fine text across the joints.

What should go on the back of a box truck?

The phone number or web address, large and simple. Drivers behind a stopped truck have time to read the rear, so it should tell them how to reach you.

Do you wrap semi trailers?

Yes. We have wrapped delivery fleets that include vans, box trucks and a semi trailer. Large trailers are scheduled for longer install time.

Get a wrap quote from Kennesaw

Send the truck or trailer make, body length and a few photos. We’ll lay the design out on the real dimensions and quote it. For a mixed delivery fleet, see how we handled Fontis Water’s vans, box trucks and semi trailer.

Start a project or call (678) 861-7446, Monday to Friday, 9am to 4pm. Our shop is at 2000 Cobb International Blvd NW, Suite E, Kennesaw, GA 30152.

Written by Matt Matthews, owner of High Stakes Creative, the Kennesaw branding and wrap shop he has led since 2007. Every vehicle shown in this article is a High Stakes Creative job from 2020 or later.

Sources

Keep reading

Planning a project like this?

Send the floor plans, brand guide and the date you are working toward. We will come back with a scope, a schedule and one point of contact.

High Stakes Creative
2000 Cobb International Blvd NW, Suite E, Kennesaw, GA 30152
(678) 861-7446
info@highstakescreative.com
Monday to Friday, 9am to 5pm